Cmy Developer Drive Motor Assembly - Lexmark C935 Service Manual

5057-XXX
8. Remove the rear lower cooling fan assembly (A).

CMY developer drive motor assembly

1. Remove the rear upper cooling fan bracket assembly. See
on page 4-111.
2. Remove the developer / transfer roll HVPS card assembly. See
removal" on page
3. Remove the lower printer engine card bracket assembly. See
removal" on page
4. Remove the 5V LVPS card bracket assembly. See
5. Disconnect the connector from the CMY developer drive motor assembly (A).
6. Release the harnesses from the clamps.
7. Remove the two screws securing the CMY developer drive motor assembly (A) to the machine.
8. Remove the CMY developer drive motor assembly (A).
4-100
Printer Service Manual
Connector
A
4-112.
4-92.
Clamp
Connector
"Rear upper cooling fan bracket assembly removal"
"Developer / transfer roll HVPS card assembly
"Lower printer engine card bracket assembly
"5V LVPS card bracket assembly removal" on page
A
Previous
Next
Go Back
4-97.