Noise Filter Assembly Removal - Lexmark C935 Service Manual

5057-XXX
12. Remove the AC drive card bracket assembly (A).

Noise filter assembly removal

1. Remove the rear cover assembly. See
2. Remove the rear upper cooling fan bracket assembly. See
on page 4-111.
3. Remove the rear left middle cover. See
4. Remove the developer / transfer roll HVPS card assembly. See
removal" on page
5. Remove the 24V LVPS card bracket assembly. See
6. Remove the CMYK transfer HVPS card assembly. See
page 4-104.
7. Remove the AC drive card assembly. See
8. Disconnect the heavy gauge connector from the circuit breaker.
9. Remove the screw securing the noise filter assembly (A) to the machine.
10. Release the two plastic retainers with needle nose pliers securing the noise filter assembly (A) to the machine.
4-110
Printer Service Manual
"Rear cover assembly removal" on page
"Rear left middle cover removal" on page
4-112.
"AC drive card bracket assembly removal" on page
"Rear upper cooling fan bracket assembly removal"
"Developer / transfer roll HVPS card assembly
"24V LVPS card bracket assembly removal" on page
"CMYK transfer HVPS card assembly removal" on
4-5.
4-6.
4-96.
4-109.
Previous
Next
Go Back