Optical Error (Adf); Operator Panel Error - Fujitsu fi-8190 Operator's Manual

Optical Error (ADF)

If an optical error occurs in the ADF, the following is displayed on the operator panel.
● For the LCD
An error code, error details, and a solution for the problem are displayed on the LCD.
Error Code
E2:74
E3:75
● For the Function Number Display
An alphabetical character and a number for the error code are displayed alternately on the Function Number
Display.
Error Code
E2
E3
Take the following measures.
● Refer to Cleaning the Inside of the Scanner (ADF) with a Cloth (page 222)
● Turn the scanner off then back on.
If the problem still persists, write down the error code, check each item in
Service Provider (page 330)
the contact information in the Contact List if supplied with this product, or refer to the contact information in
the Contact for Inquiries section if provided in Safety Precautions supplied with this product, and then make an
inquiry.

Operator Panel Error

If an operator panel error occurs, the following is displayed on the operator panel.
● For the LCD
An error code, error details, and a solution for the problem are displayed on the LCD.
Error Code
E6:D3
Error Details and the Solution
E2:74 Error
Optical error (ADF Front)
Turn the power back on. If the problem persists, refer to the Operator's
Guide and take measures accordingly.
E3:75 Error
Optical error (ADF Back)
Turn the power back on. If the problem persists, refer to the Operator's
Guide and take measures accordingly.
Error Details (displayed in the Error Recovery Guide window)
Optical error (ADF Front)
Optical error (ADF Back)
and then contact the distributor/dealer where you purchased this product. Refer to
Error Details and the Solution
E6:D3 Error
Operator Panel error
Turn the power back on. If the problem persists, refer to the Operator's
Guide and take measures accordingly.
258
Troubleshooting
and clean the glass.
Before You Contact the Scanner