Engine Remounting - Yamaha YZF1000RJ Service Manual

ENGINE ASSEMBLY AND ADJUSTMENT
I
ENG
I ~I
133123
2.lnstall:
• O-ring
• Oil cooler G)
• Bolt®
~
Bolt (oil cooler):
~ 63 Nm (6.3 m • kg, 45 ft • lb)
NOTE: - - - - - - - - - - - -
• Apply engine oil to the O-ring of the oil cooler.
• Make sure that the O-ring is positioned
properly.
A
WARNING
Always use a new O-ring.
3.Apply:
• Engine oil (lightly)
4-82
(to the O-ring (D of the new oil filter)
NOTE: - - - - - - - - - - - -
Make sure that the O-ring is positioned properly.
4.lnstall:
• Oil filter
CD
Oil filter:
17 Nm (1.7 m • kg, 12 ft• lb)
A
WARNING
Always use a new oil filter.
Refer to "ENGINE OIL REPLACEMENT" in
CHAPTER 3.
EB404230
ENGINE REMOUNTING
When remounting the engine, reverse the
removal procedure.
Note the following points:
1.lnstall:
• Engine assembly
(from the right side of the motorcycle)
•
•
•
•
•
•
•