Low Fuel Level Sensor Replacement - Buell XB 2008 Series Service Manual

sm00868
1
1. Plastic retaining ring
2. Plastic retainers

Low Fuel Level Sensor Replacement

1. Remove fuel pump assembly from tank. See
PUMP, Removal in this section.
2. See Figure 4-34. Disconnect low fuel level sensor con-
nector (10).
3. Remove screw (8) securing low fuel level sensor (7) in
place.
4-22 2008 XB Service: Fuel System
2
3. Fuel pressure regulator
4. Fuel pressure regulator housing
Figure 4-33. Fuel Pressure Regulator
4. Install new sensor.
5. Install screw (8) securing sensor and tighten to 18-22 in-
4.13 FUEL
lbs (2.0-2.5 Nm).
6. Attach low fuel level sensor wire connector (10).
7. Install fuel pump assembly. See
Installation
4
3
in this section.
4.13 FUEL PUMP,