Buell XB 2008 Series Service Manual page 252

28. See Figure 3-9. Remove vent oil line (11).
a. Remove clamp (12) in front of starter securing vent
oil line to return oil line.
b. Disconnect vent oil line from oil pump.
c. Disconnect vent oil line at swingarm/oil reservoir (10)
and remove. See 3.11 OIL LINE
29. Remove feed oil line (6).
a. Remove two p-clamps (8) from feed oil line (one on
crankcase and one on swingarm/oil reservoir.
b. Remove feed oil line (6) at oil pump (1).
c. Disconnect feed oil line at swingarm/oil reservoir and
remove. See 3.11 OIL LINE
3-16 2008 XB Service: Engine
FITTINGS.
FITTINGS.
30. Remove return oil line (7).
a. Remove p-clamp (8) at swingarm/oil reservoir (10).
b. Disconnect oil return line (7) at swingarm/oil reservoir
(10). See 3.11 OIL LINE
c. Disconnect oil return line (7) at oil pump (1) and
remove.
FITTINGS.