INSTALLATION
1.
See
Figure
2-186. Install number plates (1) to left and right
tail sections using screws (2) and sleeves (3) and leave
loose.
2.
Install screw (4) attaching the number plate (1) to the
reflector bracket (5) and leave loose.
3.
Tighten the number plate screws (2) to 18-20 ft-lbs (24-27
Nm).
4.
Tighten the number plate to reflector bracket screw (4) to
12-36 in-lbs (1.4-4 Nm).
2008 XB Service: Chassis 2-141