Buell XB 2008 Series Service Manual page 255

sm03744
3
1
1. Neutral switch connection [131]
2. Oil pressure indicator switch wire
3. Interactive exhaust cable
Figure 3-11. Electrical Connectors and Interactive Exhaust
Cable Under Sprocket Cover
31. Remove front and rear muffler brackets.
32. See Figure 3-12. Remove two fasteners (2) and remove
sidestand assembly.
33. Support engine with wide scissors jack.
sm03933
2
1. Sidestand asembly
2. Bracket fasteners (2)
Figure 3-12. Sidestand Assembly (Extended)
See Figure
frame with overhead hoist in order to remove rear isolator bolt.
Failure to do this will result in main frame dropping slightly.
1
NOTE
3-13. At this point it is necessary to support main
2008 XB Service: Engine 3-19
2