Installation; Firebolt; Lightning - Buell XB 2008 Series Service Manual

sm00865
3
2
1. Fuse block and electrical relays
2. Electronic control module
3. Bank angle sensor
Figure 4-21. Bank Angle Sensor: Ulysses

INSTALLATION

Firebolt

1. Position bank angle sensor on headlight bracket. Make
sure locating post on sensor engages hole in mounting
tab.
2. Install bank angle sensor to mounting tab with fasteners
and new locknuts. Tighten fastener to 12-36 in-lbs (1.4-
4.1 Nm).
3. See Figure 4-22. Install bank angle sensor connector [134]
(1).
4. Install front fairing. See
SHIELD, AND MIRRORS:
4-14 2008 XB Service: Fuel System
1
2.49 FRONT FAIRING, WIND-
FIREBOLT.
5. Connect negative battery cable, tightening to 72-96 in-
lbs (8-11 Nm).
After installing seat, pull upward on seat to be sure it is
locked in position. While riding, a loose seat can shift
causing loss of control, which could result in death or
serious injury. (00070b)
6. Install seat.
sm00862
1
1. Bank angle sensor
2. Headlights
Figure 4-22. Bank Angle Sensor: Firebolt

Lightning

1. See Figure 4-23. Install bank angle sensor connector [134].
2. Position bank angle sensor on seat latch bracket. Make
sure locating post on sensor engages hole in mounting
tab.
3. Install bank angle sensor to mounting tab with fasteners.
Tighten fastener to 12-36 in-lbs (1.4-4.1 Nm).
4. Connect negative battery cable and tighten fastener to
72-96 in-lbs (8-11 Nm)
After installing seat, pull upward on seat to be sure it is
locked in position. While riding, a loose seat can shift
causing loss of control, which could result in death or
serious injury. (00070b)
5. Install seat.
2