Buell XB 2008 Series Service Manual page 327

sm02941
1. Spacer, sprocket shaft
2. Retaining ring, oil seal
3. Oil seal
4. Thrust washer
5. Crankcase half
6. Bearing
7. Bearing retaining ring
4. See Figure 3-138. Attach left crankcase half to engine
stand.
5. Install flywheel assembly
GUIDE (Part No. HD-42326-B).
6. See Figure 3-139. Install pinion shaft bearing.
a. Lubricate pinion shaft bearing with engine oil.
b. Slip bearing on pinion shaft.
c. Install new retaining ring in groove of pinion shaft
bearing inner race.
6
7
Figure 3-136. Sprocket Shaft Bearing Assembly
using CRANKSHAFT
3
4
5
2008 XB Service: Engine 3-91
1
2