sm00020
3
1
1. Wire seal
2. Pin housing
3. Pin terminal
4. Locking wedge
Figure A-19. Deutsch Connector: 2, 3, 4 and 12-Place Pin
Housings
TYPE
Standard (with crimp tails)
Mini Terminal (solid barrel)
Mini Terminal (with crimp tails)
2
4
Table A-2. Deutsch Connector: Terminal Crimping Instructions
A.6 DEUTSCH STANDARD TERMINAL REPAIR
A.7 DEUTSCH SOLID BARREL MINI TERMINAL REPAIR
A.8 DEUTSCH MINI TERMINAL REPAIR
Crimping Terminals
Identify which of the types of Deutsch terminals are used with
the connector and follow the corresponding crimping instruc-
tions. Refer to
Table
A-2.
CRIMPING INSTRUCTIONS
2008 XB Service: Appendix A Connector Repair A-13