Buell XB 2008 Series Service Manual page 514

NOTE
Fuel line is installed under engine connector portion of wire
harness.
7. Route portion of main wire harness that contains the pos-
itive battery cable (3), sprocket cover wiring (4) and
transmission vent hose (2) through corner mounting strap
and guide (1) at rear of frame. Install new plastic tree
fasteners.
8. See Figure 7-96. Connect:
a. Front brake switch [121] from right switch housing.
b. Clutch switch [95] from left switch housing.
c. Horn connector [122] (11).
d. Headlight connector [38].
e. Turn signal connectors [31] (5).
f. Left handlebar connector [24] (4) and right handlebar
connector [22] (3).
g. Instrument module connector [39] (2).
h. Turn signal flasher connector [30] (1).
i. Install electronic control module.
7-70 2008 XB Service: Electrical
sm00428
2
1
1. Mounting strap and guide
2. Transmission vent hose
3. Positive battery cable
4. Sprocket cover wiring
5. Tree fastener (2)
Figure 7-95. Wire Harness Strap and Guide
3
4
5