Buell XB 2008 Series Service Manual page 672

FASTENER
Rear axle (initial torque)
Rear axle pinch bolt
Rear axle pinch fastener
Rear brake caliper mounting fasteners
Rear brake line assembly fastener
Rear brake line bracket fasteners
Rear brake line bracket fasteners
Rear brake reservoir fastener
Rear caliper bleeder valve
Rear caliper pin hanger
Rear caliper pin plug
Rear fender fasteners
Rear fender fasteners
Rear fender fasteners
Rear isolator assembly fasteners
Rear isolator bolt
Rear isolator bolt
Rear muffler bracket
Rear shock absorber reservoir clamp
rear
Rear shock reservoir clamp, Firebolt
Rear shock reservoir fastener
Rear shock reservoir fastener, Ulysses
Rear shock reservoir fastener, Ulysses
Rear tail sides to center tail section,
Lightning
Rear tail sides to center tail section,
Lightning
Rear tail sides to center tail section,
Lightning
XX TORQUE VALUES
2008 Buell XB Models Service Manual
TORQUE VALUE
23-27 ft-lbs
40-45 ft-lbs
40-45 ft-lbs
24-26 ft-lbs
36-60 in-lbs
48-72 in-lbs
48-72 in-lbs
48-72 in-lbs
30-60 in-lbs
11-14 ft-lbs
24 in-lbs
12-36 in-lbs
12-36 in-lbs
12-36 in-lbs
25-27 ft-lbs
25-27 ft-lbs
25-27 ft-lbs
32-36 ft-lbs
120-144 in-lbs
120-144 in-lbs
80-88 in-lbs
80-88 in-lbs
80-88 in-lbs
102-114 in-lbs
102-114 in-lbs
102-114 in-lbs
31.2-36.6 Nm 2.21 SWINGARM AND BRACE, Brace / After initial
torque, back off two turns and tighten to final
torque.
54-61 Nm 2.21 SWINGARM AND BRACE, Brace
54-61 Nm 4.13 FUEL PUMP, Installation
32.5-35 Nm 1.6 BRAKE SYSTEM MAINTENANCE, Brake Pad
Replacement
4.1-6.8 Nm 1.6 BRAKE SYSTEM MAINTENANCE, Brake Pad
Replacement
5-8 Nm 2.13 REAR BRAKE LINE, Installation: Ulysses
5.4-8.1 Nm 2.37 HEEL GUARD AND FOOTPEG MOUNTS:
ULYSSES MODELS, Mount Installation
5.4-8.1 Nm 2.12 REAR BRAKE MASTER CYLINDER, Installa-
tion: Ulysses
4-7 Nm 1.6 BRAKE SYSTEM MAINTENANCE, Bleeding
Brakes
14.9-18.9 Nm 1.6 BRAKE SYSTEM MAINTENANCE, Brake Pad
Replacement
3 Nm 1.6 BRAKE SYSTEM MAINTENANCE, Brake Pad
Replacement
1-4 Nm 2.15 FENDERS, Rear Fender: XB12R
1.4-4.0 Nm 2.15 FENDERS, Rear Fender:
XB9SX/XB12S/XB12Scg
1.4-4 Nm 2.21 SWINGARM AND BRACE, Installation:
Swingarm
33.9-36.6 Nm 3.5 ENGINE INSTALLATION, Assembly
33.9-36.6 Nm 3.3 ENGINE ROTATION FOR SER-
VICE, Assembly
33.9-36.6 Nm 3.5 ENGINE INSTALLATION, Assembly
43.4-48.8 Nm 3.5 ENGINE INSTALLATION, Assembly / LOCTITE
271 (red)
13.6-16.3 Nm 4.17 EVAPORATIVE EMISSIONS CONTROL (CA
MODELS), Installation: Firebolt
14-16 Nm 2.41 SUBFRAME TAIL ASSEMBLY AND BODY
WORK: FIREBOLT, Assembly
9.0-9.9 Nm 2.25 REAR SHOCK ABSORBER, Installation:
Ulysses
9.0-9.9 Nm 2.45 LEFT TAIL SECTION AND BATTERY PAN:
XB12X/XB12XT, Assembly
9.0-9.9 Nm 2.47 RIGHT TAIL SECTION:
XB12X/XB12XT, Assembly
11.5-12.8 Nm 2.42 LEFT TAIL SECTION AND BATTERY PAN:
LIGHTNING, Assembly / LOCTITE 271 (red)
11.5-12.8 Nm 2.43 CENTER TAIL SECTION:
LIGHTNING, Assembly / LOCTITE 271 (red)
11.5-12.8 Nm 2.44 RIGHT TAIL SECTION:
LIGHTNING, Assembly / LOCTITE 271 (red)
NOTES