Oil Filter Adapter - Buell XB 2008 Series Service Manual

sm00176
1
1. Crankcase fasteners
2. Crankcase fastener behind shifter mechanism

OIL FILTER ADAPTER

NOTE
The oil filter adapter has identical ends. Either end may be
installed into the filter mount.
1. See Figure 3-118. Remove the oil filter adapter from the
oil filter mount.
2. Clean and replace components as necessary.
3. Apply several drops of LOCTITE 243 (blue) to last few
threads on end of the oil filter adapter that is installed into
filter mount.
NOTE
Do not apply LOCTITE to adapter threads on filter element
side.
4. Thread oil filter adapter into filter mount.
5. Tighten to 96-144 in-lbs (11-16 Nm).
D
1
Figure 3-117. Crankcase Fasteners
1
1
2
2008 XB Service: Engine 3-81