Table of Contents
Advertisement
10.06.1999
Operating the Standard Mobile Unit
Activate / Deactivate the Call Cost or Call Time Unit Display
Your Gigaset 1054isdn can display either the telephone time units, the costs or the call duration
in the display. The default setting has the call duration in the display.
If you need the display, or processing, of call costs, then you will need to contract the comfort
connection or other "connection cost transmissions" from the German Telekom AG. Please
remember, though, that the unit counter of the German Telekom AG is the basis for your bill.
The following is recorded:
–
Call cost or time unit for individual calls on a mobile unit,
–
Total call cost or time unit for the mobile unit,
–
Total call cost or time unit for each multiple subscriber number,
–
Total call cost or time unit for the entire system.
Caution: When you activate or deactivate the cost or time unit display the call duration display
will be deactivated.
w#!o
z ) &
" or =
w
Examples:
Call cost display:
Call time unit display
1054I-06.FM
Press the displayed keys one after
another and then enter the system
code (default setting 0000).
Each entered number replaces a dash in
the display.
Press the displayed keys one after
another.
After entering the numbers the previous
settings will be displayed.
To activate press the 2 key (default setting)
To deactivate press the 0 key.
Press the save key.
Sum 23.46 and individual call cost 2.07
for the mobile unit. When the cost fac-
tor is set.
Sum 598 and individual call time unit 46
for the mobile unit. When cost factor
0.00.
Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619
Cost, Call Duration
1_ __ _
A
CD
1
_ _
A
CD
9 6 1
A
CD
C
2 346
CD
.
0 00 5 9 8
CD
207
F
.
004 6
F
61
Advertisement
Table of Contents
