Gigaset 1054isdn User Instructions page 130

10.06.1999
Operating the Comfort Mobile Unit
Charge factor -.--
Charge factor ---
Seize display on
Total
Total per unit
Note:
If the cost factor is newly entered or changed, then all previous individual and sum entries
are deleted.
If you would like to see the time unit displayed, then enter "0.00" as the new cost factor.
The cost factor can be set to a maximum of 9.99 of 999 and applies to all subscribers.
126
1054I-7A.FM
Define cost factor with decimal point.
Each time you change the cost factor the
cost sums will be set to zero!
Therefore, you should change the cost fac-
tor only at the end of a billing period.
Define cost factor without a decimal
point.
Each time you change the cost factor the
cost sums will be set to zero!
Therefore, you should change the cost fac-
tor only at the end of a billing period.
This display is capable of displaying costs in
foreign monetary units.
Activate / deactivate the cost display for
the previous call.
(This cost display must be active!)
If this function is active then the cost for the
previous call will be displayed before dialing
the next call. This make sense, for example,
in hotels to monitor the call costs for the
guests. For the functions for restoring the
call costs please see "Deleting Sums"
Verify and Individually delete cost sums
for multiple subscriber numbers.
Scroll the individual multiple subscriber
numbers with NEXT.
The last sum in the list is the total sum for
the base station.
Verify or individually delete the costs
sums for each registrated mobile unit or
other connected device, i.e., for each inter-
nal subscriber.
Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619
Cost, Call Duration
Charge factor
Charge factor
Charge display
activated
after seizure
Chg.MSN:12345678
NEXT
Total charges
NEXT
INT1:
INT2:
NEXT
1.--
SAVE
---
OK
12.20
DELETE
123.50
DELETE
56.50
4.30
DELETE