Table of Contents
Advertisement
10.06.1999
Operating the Standard Mobile Unit
Connecting and Starting Operation of the System: Multiple Device Connection
In addition to setting the connection type "Multiple Device Connection" (see also page 9) you
can also set the operational mode, either local (one cell) or multiple cell operation (see also page
153). The default setting is multiple device connection and one cell operation.
Using this setting your Gigaset 1054isdn can only be operated on a multiple device connection
that was installed by the Deutsche Telekom AG.
The settings for the system connection are found on page 32.
w#!o
.
z#* Press the displayed keys one after
Set one cell operation:
!
or multiple cell operation:
=
When finished set the type of multiple cell operation:
=
or:
!
w
Note:
Telephoning between internal subscribers using multiple base stations only makes sense,
when your Gigaset is connected to a telephone system.
The telephone system must support internal calling (see chapter "Multiple Cell Systems"
page 153).
1054I-06.FM
Press the displayed keys one after
another and then enter the system
code (default setting 0000).
Each entered number replaces one of
the dashes in the display
another.
The actual settings will be displayed;
here multiple device connection, one
cell operation.
Press the 1 key.
Press the 0 key.
Press this when you want to use multi-
ple cell operation on a direct line.
Press this when you want to use a mul-
tiple cell operation within a telephone
system.
Press the save key.
Settings are displayed.
Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619
Basic Settings
1_ __ _
A
CD
1
_ _
A
CD
- n 1
A
CD
- n 1
A
CD
- n 0 0
A
CD
- n 0 0
A
CD
- n 0 1
A
CD
C
31
Advertisement
Table of Contents
