Ring Allocation: Set / Change Ring Count For Group Ring - Gigaset 1054isdn User Instructions

10.06.1999
Operating the Comfort Mobile Unit

Ring Allocation: Set / Change Ring Count for Group Ring

Using the ring count you can define the number of rings used to signal the first call group before
the second call group is signaled. The default setting is three ring cycles. You can choose from 1
to 9 rings.
MSN X
No. of cycles
OK
or
1...9
SAVE
138
1054I-7A.FM
After selecting "MSN X" (see above)
the following menu is displayed:
Use NEXT to scroll...
until "No. of cycles" is in the 1st line and
then select with OK.
Press OK to verify the setting.
Press a number key to enter the ring cycle
count, here 5.
Press SAVE to save the setting.
Example:
External call number
12345678
If an external calls come in for 12345678 then the subscribes with
the internal numbers 2, 3, 5 will be signaled twice at the same time,
then the subscribers with the internal numbers 2, 3, 5, 1, 7 .
Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619
System Settings
Ring allocation
No. of cycles
----------------
NEXT
Set number of
ring cycles
Set number of
ring cycles
Call group 1 Call group 2
2, 3, 5 1, 7
OK
3
OK
5
SAVE