Edit Restricted Numbers / Activate, Deactivate Lock - Gigaset 1054isdn User Instructions

10.06.1999
Operating the Comfort Mobile Unit

Edit Restricted Numbers / Activate, Deactivate Lock

By storing the restricted number you can prevent numbers from being dialed that begin with one
of the blocked numbers. For example, if you set "00" as a restricted number, then it will no
longer be possible to make calls to foreign countries. For each mobile unit you can store up to 3
separate restricted numbers (each from 1 to 8 digits).
1. In the non-active mode press the
2. In the service menu select "System settings" and enter the system code (default setting
0000) (see also page 133).
Call barring
Lock Int0
Lock on
Lock no. list
New entry
Delete lock no.
- - - - - - - -
Lock on
Lock no. list
New entry
Delete lock no.
128
1054I-7A.FM
ß key and select "Service" from the main menu.
After entering the correct system code the
following menu is displayed:
Use NEXT to scroll the next menu until "Call
barring" is in the 1st line and then select
with OK.
Use NEXT to scroll the menu and then
select an internal subscriber for the
lock (e. " Int0"), for whom the call number
lock is to apply
.
The menu for setting the lock numbers is
displayed (complete menu left).
Use NEXT and OK to select and edit the fol-
lowing options:
Activate / deactivate the lock
using lock numbers.
After selecting "Lock ON" this brief mes-
sage is displayed.
Check / change the lock number.
After selecting the lock number it can be
verified with OK
Enter lock numbers.
Delete individual lock numbers.
Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619
Duration/Units
Call barring
Change sys. code
NEXT
Delete all
Lock Int0
Lock Int1
NEXT
Lock on
Lock no. list
New entry
NEXT
Lock numbers
for Int0
activated
No.1: 0180_
No.1: 018_
No.1: 0
No.2: 0190
No.3: 0180
NEXT
Locking
OK
OK
OK
OK
SAVE
DELETE