Set Multicell Operation - Gigaset 1054isdn User Instructions

10.06.1999
Multicell System
OK
OK
Note:
You can registrate your comfort mobile unit on up to 4 base stations.
You can registrate up to 8 mobile phones on a base station. If 8 mobile phones are already
registrated, then after you enter the system code during the registration process the text
"No free internal no." will be displayed.
When working with more than one base station, the base station number display function
should be active.

Set Multicell Operation

1. In the non-active mode press the
2. In the service menu select "System settings" and enter the system code
(default setting 0000) (see also page 133).
Configuration
Point to MP.
act:multicell op.
new:local op.
- - - - - - - -
OK
or
ENABLE
Note:
When you have a multicell operation, then the dialogue key
CHANGE will be in the display during an external call.
162
1054I-09.FM
Press OK to confirm the internal number.
If needed, correct with
Complete the registration procedure.
The comfort mobile unit will display with
which internal number it was registrated.
ß key and select "Service" from the main menu.
After entering the correct system code the
following is displayed:
Scroll the next menu with NEXT until "Con-
figuration" is in the 1st line...
and then select OK.
Select "Point to MP ." with OK in the next
menu.
Scroll the next menu with NEXT until "multi-
cell op." is in the 1st line...
and then select with OK
Press this when you want to establish multi-
cell operations on an outside line
Press this when you went to establish multi-
cell operation behind a telephone system.
Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619
Comfort Mobile Unit
Current INT no.:
Registrated
internal no. 4
Time/Units
Phone no. barred
Change sys. code
NEXT
act: Point to MP.
new: Point to P.
- - - - - - - - -
NEXT
new: Multicell op.
act: local op.
- - - - - - - - -
NEXT
Internal connec.
within S0-Bus
disabled
ENABLE
External
00:02:45
CHANGE
4
OK
with
OK
OK
OK
OK
CONSLT.