Table of Contents
Advertisement
10.06.1999
Multicell System
Base Station Selection Automatic / Manual / Combined
When you operate multiple base stations, then you can define on which base station you want to
operate your mobile phones. You have the choice between automatic, manual, or combined. The
setting is made when the mobile unit is not active.
1. Automatic selection of the base station (default setting)
The mobile unit will select the base station for operation itself
when it enters the base station's range
when base stations are "competing" (in the overlap area) to the base station that it sees
as the best.
wü
=
w
2. Manual selection of the base station:
You can define the base station to use when making a call; this is recommended for areas of
overlap.
wü
!
$
...
w
3. Combined selection of the base station:
The mobile unit will search for the base station that you have set for 30 seconds. If it cannot
find it then it will look for the base station that offers the best connection.
wü
!
!
w
Note:
Only registrated mobile phones can be operated on a base station.
If contact to a base station is lost during the search for another base station the ready sym-
bol will blink in the display.
You can always be reached using the base station on which your mobile unit is registrated.
1054I-09.FM
Press these to start the procedure
Press the 0 key.
Automatic registration is set.
The 0 key will blink.
Press the store key.
Press these to start the procedure
Press the number of the base station
that you want to select.
The entered number will blink, here 1
Press the store key.
Press these to start the procedure
Enter the base station number that
should be searched for first.
Press the number again to set the com-
bined search.
The 0 key and here the 1 key blinks,
Press the store key.
Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619
Standard Mobile Unit
0 123 4
A
C
0 123 4
A
C
0 123 4
A
C
0 123 4
A
C
0 123 4
A
C
0 123 4
A
C
157
Advertisement
Table of Contents
