Non-Cordless Devices; Connector Socket; Connecting Telephones; Connecting Non-Cordless Devices (Other Than Telephones) - Gigaset 1054isdn User Instructions

Table of Contents

10.06.1999

Installation

Connector Socket

The base station Gigaset 1054isdn has two telephone sockets (B and C) that are available for

non-cordless end user devices. The connection sockets are automatically assigned internal call

numbers:

The connectors for the accessory equipment must have TAE plugs. The sockets of the Gigaset

1054isdn have the coding F/N.

The following can be connected

Telephone (socket B or C)

Answering machine (socket B or C)

Fax machine (socket B)

Modems (socket B)

T-On-line (BTX) devices (socket B)

External clock (socket B or C)

Intercom (socket C)

Only certified non-cordless devices may be connected.

Connecting Telephones

A telephone can be connected and used immediately without any additional settings. The tele-

phone, or non-cordless device doesn't have to be registrated at the base station.

The dialing mode (pulse or tone) is recognized automatically and doesn't need to be set manu-

ally. It is not possible to establish a connection with two non-cordless devices at the same time.

The signal key on the telephone key pad will not function once the telephone is connected to

Gigaset 1054isdn (Exception: Telephones with tone dialing).

The charges are not displayed on the telephone. However, the accumulating costs of each call

are recorded by the system. The charges for each subscriber and each multiple number can be

queried or deleted from a registrated mobile unit.

Connecting Non-Cordless Devices (other than telephones)

Using one of the registrated mobile units you can define the necessary settings for the additional

device connection.

You can stipulate whether you want to connect a fax machine, modem, BTX, an intercom or an

answering machine (see page 74 or page 134).

You can also define additional subscriber specific settings, for example, trunk authorization, ring

allocation, etc. using a registrated mobile unit.

When using a fax machine on Gigaset 1054isdn, you will need to set the fax machine for

operation behind a telecommunication installation (see the User's Guide for your fax

machine).

You can use the following data transfer speeds on the subscriber connections:

Socket B (top), internal call number 0: up to 28,800 Baud

Socket C (bottom), internal call number 9: up to 9,600 Baud

1054I-02.FM

Socket B (top) has the internal call number 0

Socket C (bottom) has the internal call number 9

Internal call number

0 or 9

Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619