System Settings; Introduction To Procedure For System Settings; Call Baring - Gigaset 1054isdn User Instructions

10.06.1999
Operating the Comfort Mobile Unit

Introduction to Procedure for System Settings

The following procedural schema represents the procedures for most system settings. After
completing these procedures you will select the desired system setting from the menu.
a
ß
Service

System settings

o
OK
1054I-7A.FM
The comfort mobile unit is in the non-active
mode
Press the F key, Main menu is displayed:
Use NEXT to scroll the main menu...
until "Service" is in the 1st line,
and then select with OK.
Use NEXT to scroll the main menu...
until "System settings" is in the 1st line,
and then select with OK.
Enter the 4 digit system code
(default setting 0000)
correct with
Complete the entry of the system code with
OK.
After entering the system code the follow-
ing menu is displayed:
You will find the next steps explained in the
respective functional descriptions.
Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619
, if needed.
System Settings
Station 2
TEL.BOOK REDIAL
Phone book
Number redial
Telephone lock
NEXT OK
Service
- - - - - - - -
Phone book
NEXT OK
Cancel call park
Call forward. on
Sel.call enable
NEXT OK
Enter
system code:
- - - -
OK
Duration/Units

Call baring

Change sys. code
NEXT OK
133