Table of Contents
Advertisement
10.06.1999
Operating the Comfort Mobile Unit
Lock for Outgoing Call (System Lock) / /Emergency Numbers
With the system lock you can block your base station for outgoing calls. Incoming calls can still
be answered.
Exception: Calls with emergency numbers are possible, provided that they are saved. Four 16
digit emergency number can be saved.
1. In the non-active mode press the
2. In the service menu select "System settings" and enter the system code (default setting
0000) (see also page 133).
Lock on
Lock on
Phone No. list
New entry
Delete phone no
- - - - - - -
Lock on
Phone no. list
New entry
Delete phone no.
Note:
If you have activated a telephone block with direct dialing at the same time as the system
lock with emergency number, then no numbers will be dialed. Exception: The direct dial
number is an emergency number.
1054I-7A.FM
ß
key and select "Service" from the main menu.
After entering the correct system code the
following menu is displayed:
Scroll in the next menu with NEXT, until
"Lock on" is in the 1st line and then select
with OK.
The menu for activating the system lock is
displayed (complete menu left).
Use NEXT and OK to select and edit the fol-
lowing options:
Activate / deactivate the lock
Verify / change emergency numbers
After selecting the emergency numbers
from a list and changed.
Enter emergency numbers
Individually delete emergency numbers.
Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619
Duration/Units
call barring
Change Sys.Code
NEXT
Lock on
Phone no. list
New entry
NEXT
System lock
activated
12345678_
01_
12345678
23456789
- - - - - - - -
NEXT
Locking
OK
OK
Emerg. no.?
OK
Emerg. no.?
SAVE
DELETE
127
Advertisement
Table of Contents
