Table of Contents
Advertisement
10.06.1999
Operating the Comfort Mobile Unit
Activate Automatic External Call Back
If you call someone externally whose line is busy, you can activate the "automatic call back"
function. As soon as the desired connection is free, you will be called back automatically. To use
the automatic call back function, you must have contracted the ISDN service feature "automatic
call back" from the Deutschen Telekom AG (at the time of the release of these User Instructions
this function was not yet available).
If this function is not available the dialog key CALLBACK is suppressed.
b
CALLBACK
Note:
The callback function will be deactivated automatically once the connection is made.
Deactivate Automatic External Call Back
a
g
ß
Systemfunct.set.
Ext.callback
OK
AUS
122
1054I-7A.FM
You have an external connection.
The called connection is busy.
Press this to activate the automatic call back
function.
You will see this display for 2 seconds as
confirmation.
The comfort mobile unit is in the non-active
mode.
You have an outside line and can see that a
system function is active, for example, the
automatic call back.
Press the F key.
Menu is displayed.
In the menu use OK to select "System-
funct. set."
Scroll the next menu with NEXT...
until "Ext.callback" is in the 1st line and
then select with OK.
Use OFF to deactivate the automatic call
back function.
You will see this display for 2 seconds as a
confirmation.
Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619
Switching Functions
External
12345678
Callback to Ext.
activated
fnct. set. act
Please dial
TEL.BOOK
Systemfunct. set
Handset volume
Cancel call park
NEXT
Int.call forward.
Ext.call forward.
Sel.call enable
NEXT
External callback
activated
OFF
Ext. callback
dectivated
K
CALLBAC
REDIAL
OK
OK
OK
Advertisement
Table of Contents
