Setting The Connection Configuration For Internal Subscribers - Gigaset 1054isdn User Instructions

10.06.1999
Operating the Comfort Mobile Unit

Setting the Connection Configuration for Internal Subscribers

You can define which types of devices can be served on the subscriber connections in the sys-
tem.
Cordless devices (internal subscriber numbers 1 to 8) are either mobile units or cordless TAE
connections like Gigaset 1000TAE that allow, for example, the connection for telephones and fax
machines cordless to Gigaset 1054isdn. "Mobile unit" is the default setting for these devices.
For the cord connected devices (internal subscriber numbers 0 and 9) the devices"type „tele-
phone" is the default setting. Modems or fax machines should be connected to 0, and a door
opener can only be connected to connection 9.
1. In the non-active mode press the
2. In the service menu select "System settings." and enter the system code (default setting
0000) (see also page 133).
Equipment data
a/b line
Set cord connected subscriber connection (a/b connection):
a/b-connect. 0
active:Telephone
:Modem
new
:Fax
new
new :neutral
new :no funct.
- - - - - - - -
Set cordless subscriber connection:
Internal 1
active:Mobileset
new :neutral
new
:Modem
new :Fax
new :Telephone
- - - - - - - -
134
1054I-7A.FM
ß key and select "Service" from the main menu.
After entering the correct system code the
following menu is displayed:
Scroll the menu with NEXT...
until "Equipment data" is in the 1st line und
then select with OK.
Scroll the menu with NEXT...
until "a/b line"is in the 1st line and then
select with OK.
Scroll the menu with NEXT and select one
of the two accessory device connections
and select with OK; here "a/b connection 0" .
The menu for selecting the device type is
displayed (complete menu left).
Use NEXT to select the device type and
confirm with STORE; here "FAX" .
Neutral means fax and telephone
Scroll the menu with NEXT...
until, for example, "Internal 1" is in the 1st
line and then select with OK.
The menu for selecting the device type is
displayed (complete menu left).
Use NEXT to select a device type and con-
firm with STORE; here "Fax"
(FAX refers to a fax machine connected via a
Gigaset 1000TAE)
Neutral means fax and telephone
Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619
System Settings
Duration/Units
Call barring
Change Sys.Code
NEXT
Autom.seizure
Call pickup
Access rights
NEXT
a/b-connect. 0
a/b-connect. 9
Internal 1
NEXT
new
new
new
NEXT
a/b-connect. 0
a/b-connect. 9
Internal 1
NEXT
new
new
- - - - - - - -
NEXT
OK
OK
OK
:Fax
:neutral
:no funct.
SAVE
OK
:FAX
:Telephone
SAVE