Table of Contents
Advertisement
10.06.1999
Operating the Comfort Mobile Unit
Activate / Deactivate Automatic Line Seizure
By pressing the phone key you will receive an outside line immediately (default setting). If this
function is not active, then you will need to dial a 0 to receive an outside line.
1. In the non-active mode press the
2. In the service menu select "System settings" and enter the system code (default setting
0000) (see also page 133).
Equipment data
Autom.seizure
OK
or
add / delete mobile unit numbers for automatic call allocation:
1...
SAVE
1054I-7A.FM
ß
key and select "Service" from the main menu.
After entering the correct system code the
following menu is displayed:
Scroll in this menu with NEXT...
until "Equipment data" is in the 1st line and
then select with OK.
Use OK to select "Autom. seizure" .
Press OK if you only want to verify
A list of the internal numbers is displayed.
By entering or deleting you can set the
desired internal number you.
here 1 to 4; if needed, correct with
Use SAVE to save the settings.
Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619
Basic Settings
Duration/Units
Call barring
Change Sys.Code
NEXT
Autom.seizure
Call pickup
Access rights
NEXT
Automatic
seizure from Int.:
1 2 _
Automatic
seizure fromInt.:
.
1 2 3 4
OK
OK
OK
SAVE
97
Advertisement
Table of Contents
