Standard Mobile Unit; Registrating A Standard Mobile Unit On Multiple Base Stations - Gigaset 1054isdn User Instructions

Table of Contents

10.06.1999

Multicell System

Registrating a Standard Mobile Unit on Multiple Base Stations

You can registrate up to 8 mobile phones on one base station.

1. The mobile unit must be turned off

if needed, turn it off by

pressing the

2. On the base station on which you want

to registrate:

Press the registration key with a pointed

object (for example, pencil, pen, etc.).

Registration key will blink.

3. After this on the mobile unit (within 1 minute):

!...$

!...(

Note:

If 8 mobile phones are already registrated, then after entering the system code during the

registration procedure 3 dashes will be displayed and a negative acknowledgement tone will

be heard.

156

1054I-09.FM

until the display goes blank.

The mobile unit must be turned off

Press the 1 or 2 or 3 or 4 key

and hold it in.

With the number keys between 1 and 4

you determine the base station number.

Press and hold the ON key until the dis-

play comes on.

Enter the system code.

The default setting for the

system code is 0000.

Finish entering the system code

Please wait until the connection is made

with the base station.

All available internal subscriber numbers

will be displayed;

here, for example 5 to 8.

Enter the desired internal subscriber

number for the mobile unit, i.e. press a

number key between 1 and 8; here 5.

The mobile unit is registrated at the

internal number 5 on base station1

Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619