13
. STEERING HANDLEBAR/FRONT WHEEL/FRONT
BRAKE/FRONT SHOCK ABSORBER/FRONT FORK
Connect the brake fluid tube to the brake
caliper and tighten the fluid tube bolt.
Torque: 24.5~34.3N-m
Fill the brake reservoir with the specified
brake fluid and bleed air from the brake
system. ( 13-11)
*
When installing the brake fluid tube, be
sure to install the two sealing washers.
FRONT SHOCK ABSORBER
REMOVAL
Remove the front upper cover. ( 2-3)
Remove the front lower cover. ( 2-3)
Remove the front wheel. ( 13-5)
Remove the front brake caliper. ( 13-11)
Remove the front shock absorber upper
mount bolts.
Loosen the lower mount bolts to remove the
front shock absorbers.
DISASSEMBLY
Remove the dust boot.
Remove the dust seal.
Remove the circlip.
Brake Fluid Tube
Fluid Tube Bolt
Front Fork
Shock Absorber
Mount Bolts
Dust Boot
SUPER 9
50
Washers
Dust Seal
Circlip
13-14