Esc/P-K Emulation Settings - Fuji Xerox DocuCentre-III 2007 Administrator's Manual

15 Appendix
Barcodes
In the ESC/P-K mode, you can use barcodes. The barcodes that can be used are as
follows.
Forms
You can use ESC/P-K to register forms on the machine. Up to 64 forms can be
registered.

ESC/P-K Emulation Settings

The following tables show the basic and extended settings that can be configured on
the ESC/P-K emulation mode menu.
Basic Settings
Setting Item
Paper tray
15
440
JAN code
CODE39
CODABAR
Industrial 2 of 5
Matrix 2 of 5
Interleaved 2 of 5
Item
Number
3 Sets the paper tray to be used for printing.
[0]
[1] (Default)
[2]
[3]
[4]
[5]
If printing from Tray 5 (Bypass), instruct printing and then operate the
machine to start printing. To cancel the setting, change the setting for
"Tray 5 Confirmation".
Important •When Trays 1 to 4 is selected, the size of paper loaded in the tray
Note
Value
: Auto
: Tray 1
: Tray 2
: Tray 3
: Tray 4
: Tray 5 (Bypass)
becomes the output paper size, and thus [Paper Size] cannot be set.
• When [Auto] is selected, and if the paper of the same size is loaded
in the same orientation in multiple trays, paper will be supplied in the
order of Tray 1 Tray 2 Tray 3
is loaded in multiple trays but in different orientations, the paper
loaded in the landscape orientation is given priority.
Tray 4. If paper of the same size