Step 5 Setting A Feature; Step 6 Exiting The System Administration Mode - Fuji Xerox DocuCentre-III 2007 Administrator's Manual

5 Tools
E-mail/Internet Fax Service Settings
Allows you to configure the e-mail and Internet Fax transmission specifications.
For more information, refer to "E-mail/Internet Fax Service Settings" (P.150).
Mailbox/Stored Document Settings
Allows you to set how to delete documents stored in mailboxes.
For more information, refer to "Mailbox/Stored Document Settings" (P.153).
Job Flow Service Settings
Allows you to configure the settings relating to job flows.
For more information, refer to "Job Flow Service Settings" (P.155).
Setup
You can create mailboxes and job flow sheets, and can create and change an address
book (address numbers).
For more information, refer to "Setup" (P.156).
Accounting
You can register machine users and configure the settings for account administration.
For more information, refer to "Accounting" (P.173).
5
Authentication/Security Settings
You can configure the authentication and security settings.
For more information, refer to "Authentication/Security Settings" (P.180).

Step 5 Setting a Feature

1
Select any feature.
Note
2
Set the feature.
3
After setting the feature, select [Save].

Step 6 Exiting the System Administration Mode

1
Select [Close], and [Tools] screen exits.
2
Select [Reboot Now] when a message prompts user to reboot the machine appears.
78
• Select a submenu from the [Group] list, and then select a feature from the [Features] list.
• Select [ ] or [ ] as required.