Replacing The Stamp Cartridge - Fuji Xerox DocuCentre-III 2007 Administrator's Manual

Replacing the Stamp Cartridge

If the machine offers the Fax service, replace the stamp cartridge when stamp
impressions start to fade.
Important • Do not touch the ink pad of the stamp cartridge. If it comes into contact with your skin, wash
• Problems caused by using consumables not recommended by Fuji Xerox are not covered by
• Before using consumables, carefully read the instructions and precautions on the packaging.
Note • We recommend having spare consumables ready.
• To order a stamp cartridge, contact our Customer Support Center.
1
Pull up the knob on the left cover of
the document feeder, and open the
document feeder cover completely.
2
Pull up the green lever to open the
inner cover.
3
Stick the supplied pin into the old
stamp cartridge, and pull it straight
out of the machine.
Note • If only the sponge part of the
4
Insert the new stamp cartridge in
the machine.
5
Close the inner cover, and then
close the document feeder cover until it clicks into place.
immediately.
the maintenance service contract.
(Product name: Stamp Replacement Kit (red), Product code: F451)
stamp cartridge is removed,
make sure to remove the
bottom part of it also.
Replacing Consumables
49
3