Step 3 Configuration On The Computer; Centreware Internet Services Setting Items - Fuji Xerox DocuCentre-III 2007 Administrator's Manual

7 Printer Environment Settings
If DHCP or BOOTP is available in your environment, configure the method for
obtaining the addresses. The configuration of an IP address, a subnet mask, and a
gateway address is not required.
For information on how to set an IP address, refer to "Protocol Settings" (P.115)
4
If the operating system on the client is Mac OS X 10.3.9 or later, enable Bonjour port,
then the discovery feature that automatically detects printers on the IP network can be
enabled.
Note
1) Select [Port Settings].
2) Select [Bonjour] and then select [Change Settings].
3) Select [Port Status] and select [Change Settings].
4) Select [Enabled] then select [Save].
5
Select [Close].
The machine automatically reboots.
6
After the machine is restarted, print a Configuration Report to confirm that the LPD
port is enabled and TCP/IP is configured.
For information on how to print a Configuration Report, refer to "Print Reports" (P.59).
Configure other LPD or Port 9100 settings as necessary. Refer to "CentreWare Internet Services Setting
Items" (P.208).

Step 3 Configuration on the Computer

7
In order to print from the machine, the computer needs to have a print driver installed.
For information on the supported operating systems, refer to "Supported Operating Systems" (P.204).
For information on the driver installation procedure, refer to the manual contained in the CD-ROM of
the Driver CD Kit.
You can also print from a Macintosh using TCP/IP (LPD). You will need optional Adobe
PostScript 3 Kit.
Refer to the manual contained in the CD-ROM provided with the kit for the print driver installation
procedure.

CentreWare Internet Services Setting Items

The items that can be configured using CentreWare Internet Services are as follows.
For details on features provided by CentreWare Internet Services, click [Help] in this frame to see the
help.
For information on how to start CentreWare Internet Services, refer to "Starting CentreWare Internet
Services" (P.196).
Spool Destination for Jobs
Note
Print page buffer of the Port 9100 interface
Port Settings
IP Mode
Host Name
208
• [Bonjour] can be set when Adobe PostScript 3 Kit is installed.
• In order to print from a printer detected by [Bonjour], the LPD
advance.
• The spool destination is set only when LPD port is selected.
port must be activated in