Fuji Xerox DocuCentre-III 2007 Administrator's Manual page 349

Category
Error Code
C P F S M O
016-583
016-584
016-585
016-586
016-587
016-588
016-589
016-590
* If the error persists after following the listed solution, contact our Customer Support Center. The contact number is
printed on the label or card attached on the machine.
O [Cause] The machine failed to transfer data using [FTP] of the
[Scan to PC] feature because lock folder creation was not
successful on the FTP server after connection.
[Remedy] Take one of the following actions:
If any lock directory (.LCK) exists in the forwarding
destination, delete it manually, then try executing the job
again.
Check if the specified folder name can be used in the
save location.
Check if the same folder name exists in the save location.
Check if enough space is available in the save location.
O [Cause] The machine failed to transfer data using [FTP] of the
[Scan to PC] feature because folder creation was not
successful on the FTP server after connection.
[Remedy] Take one of the following actions:
Check if the specified folder name can be used in the
save location.
Check if the same folder name exists in the save location.
Check if enough space is available in the save location.
O [Cause] The machine failed to transfer data using [FTP] of the
[Scan to PC] feature because file deletion was not
successful on the FTP server after connection.
[Remedy] Check the access privilege to the FTP server.
O [Cause] The machine failed to transfer data using [FTP] of the
[Scan to PC] feature because lock folder deletion was not
successful on the FTP server after connection.
[Remedy] Take one of the following actions:
Check the access privilege to the FTP server.
If any lock directory (.LCK) exists in the forwarding
destination, delete it manually, then retry executing the
job.
O [Cause] The machine failed to transfer data using [FTP] of the
[Scan to PC] feature because folder deletion was not
successful on the FTP server after connection.
[Remedy] Check the access privilege to the FTP server.
O [Cause] The machine failed to transfer data using [FTP] of the
[Scan to PC] feature because the data could not be written
in the FTP server after connection.
[Remedy] Check if enough space is available in the save location.
O [Cause] The machine failed to transfer data using [FTP] of the
[Scan to PC] feature because the data could not be read
from the FTP server after connection.
[Remedy] Check the access privilege to the FTP server.
O [Cause] The machine failed to transfer data using [FTP] of the
[Scan to PC] feature because the file could not be saved in
the FTP server; [File Name Conflict] may be set to [Cancel
Job].
[Remedy] Set [File Name Conflict] to any item other than [Cancel
Job].
Cause and Remedy
Error Code
14
347