Paper Tray Status - Fuji Xerox DocuCentre-III 2007 Administrator's Manual

4 Machine Status
1
Select [Machine Configuration].
2
Check the machine configuration in
a screen displayed.
Note
On the [Machine Configuration] screen, you can check the following items.
Configuration Code
Document Feeder
Paper Tray
Offset stacking module
Left Top Tray
Output Device
Booklet Maker
Stamp
4
PCL
Note
[Software Version] Screen
You can check the software version.
1
Select [Software Version].
2
Check the software version in a
screen displayed.
On the [Software Version] screen, you can check the following items.
Controller ROM
IOT ROM
Finisher A ROM
Finisher B ROM
IIT ROM

Paper Tray Status

You can check the paper trays set on the machine. On the screen, you can check the
following items.
Status
% Full
Paper Size
58
• Select [ ] to return to the
previous screen or [ ] to
move to the next screen.
Duplex Module
Hard Disk
Page Memory Size
System Memory Size
PostScript
Side Output Tray
ESC/P
HP-GL/2
[
• Output Device] indicates whether or not a finisher (optional) is installed. If Finisher is
installed, it is displayed as "Finisher".
IIT Option ROM
ADF ROM
SJFI
SSMI
PDF
XPS
KS5843
KSSM
KS5895
USB
Fax Main Board
Fax Extended Board 1