Print Mode - Fuji Xerox DocuCentre-III 2007 Administrator's Manual

4 Machine Status

Print Mode

You can change and register each setting in the print mode.
Note
1
Select [Print Mode].
2
Select [Off-line] or [On-line].
Off-line
The printer does not accept data. Any data being sent is cancelled and not printed.
On-line
The printer accepts data.
3
Select a printer language.
4
Select the item to be set.
4
Retrieve Programming
You can retrieve and use settings registered in the memory.
1
Select [Retrieve Programming].
2
Select the memory number to be
used.
Factory Defaults
You can use the factory default settings.
Custom Settings
The numbers stored in the memory appear.
Programming
You can check or change the values set for the print mode item numbers.
For the items that can be configured in the ESC/P-K and PDF mode menus, refer to "ESC/P-K
Emulation" (P.438) and "PDF Direct Print Settings" (P.452).
For information on KS/KSSM emulation mode, refer to the User Guide for the Korean model. For
information on the ESC/P-K emulation mode, refer to the User Guide for the Simplified Chinese model.
1
Select [Programming].
68
• The items displayed vary depending on the options installed.