Fuji Xerox DocuCentre-III 2007 Administrator's Manual page 332

14 Problem Solving
The machine is not set to the
transport protocol which
matches the protocol on the
computer.
The data format the machine
is trying to process does not
match the data format of the
print data transmitted from a
computer.
When the print output is not as you expected
Selected print language on
the machine does not match
the print language of the print
data.
The computer is not using the
print driver supplied with the
machine (using another
company's print driver).
Mac OS X 10.3.9/10.4.10/10.5
When you cannot print
The LPD port is not enabled.
14
330
Cause
Confirm the transport
protocol selected on the
machine.
Cause
Confirm the selected print
language on the machine and
the print language of the print
data.
Confirm if the print driver on
the computer is the one
supplied with the machine.
Cause
Confirm whether or not the
LPD port is enabled.
Check point
Select the transport protocol
which matches the
computer's protocol.
- Set not to output Ctrl-D.
Check point
Select the print language on
the machine to match the
print data.
Select the print driver
supplied with the machine on
the computer. If it does not
appear on the selection list,
install the print driver
supplied with the machine
and then select it. The
operation is not guaranteed if
another print driver is used.
Check point
When you use the printer
detected by Bonjour, the LPD
port is set to enable.
Remedy
Remedy
Remedy