Fuji Xerox DocuCentre-III 2007 Administrator's Manual page 50

3 Maintenance
Important • Make sure you empty the hole punch waste container when the power is on. If you empty
1
Make sure that the machine is not
operating, and lift the top cover and
open the front transport cover of
the finisher.
2
Pull out the hole punch waste
container.
3
3
Empty the container.
4
Insert the empty hole punch waste
container all the way into the
finisher.
5
Close the front transport cover and the top cover of the finisher.
Note
48
the container when the power is off, the machine will not recognize that the container has
been emptied.
• If the front cover of the finisher is not completely closed, a message will appear and the
machine will not operate.