Assembly Of Cylinder Head - Toyota 3F-E Repair Manual Supplement

EM-26
ENGINE MECHANICAL —

ASSEMBLY OF CYLINDER HEAD

(See page EM-17)
HINT:
• Thoroughly clean all parts to be assembled.
• Before installing the parts, apply new engine oil to all
sliding and rotating surfaces.
• Replace all gaskets and oil seals with new ones.
1. INSTALL VALVES
(a) Place the valve spring seat on spring seat.
(b) Using SST and a hammer, tap in a new oil seal.
SST 09201-31010
(c) Install the valve, spring and spring retainer (or valve
rotator).
HINT: Install the spring in the correct direction as
shown.
Cylinder Head