5. After the page prints, press the Online key to restore the printer to
READY status.
Printing a List of PostScript Fonts
Situation: You want to see a list of the PostScript fonts installed on the
printer.
Action:
1. Press the Online key to take the printer offline.
2. Press the Menu key. TEST MENU appears in the display area.
3. Press the Item key until you see PRINT PS FONTS.
4. Press the Enter key to print the PostScript fonts list.
5. After the page prints, press the Online key to restore the printer to
READY status.
Printing a List of IPDS Resident Fonts
Situation: You have the optional IPDS SIMM installed on your printer and
you want to see a list of the IPDS resident fonts.
Action:
1. Press the Online key to take the printer offline.
2. Press the Menu key. TEST MENU appears in the display area.
3. Press the Item key until you see PRINT IPDS FONTS. (This item appears
only if you have the IPDS SIMM installed on your printer.)
4. Press the Enter key to print the IPDS resident fonts list.
5. After the page prints, press the Online key to restore the printer to
READY status.
Adjusting Print Density
Situation: You want to increase or decrease the print density, making the print
darker or lighter.
Action:
1. Press the Online key until you see OFFLINE in the display.
2. Press the Menu key until you see CONFIG MENU in the display.
3. Press the Item key until you see DENSITY=n* in the display, where n is
the density value currently selected.
4. Press the Value key until you see the value you want to assign to the
toner density; 4 is the most dense, 0 is the least dense.
30
InfoPrint 20: User's Guide -- CD Version