Printing The Token-Ring Network Interface Card Configuration Page; Printing A List Of Pcl5E Fonts; Printing A List Of Postscript Fonts - IBM 4332-004 - InfoPrint 40 B/W Laser Printer User Manual

2. Press the Menu key once. TEST MENU appears in the message display
area.
3. Press the Item key until you see PRINT EN CONFIG.
4. Press the Enter key.
5. Press the Online key to restore the printer to READY status, and print the
configuration page. The printer must be online to print the configuration
page. It takes about a minute.
Note: The configuration page prints on the paper size that is specified by the
PAGESIZE item in the PCL Menu.

Printing the Token-Ring Network Interface Card Configuration Page

Situation: You want to print the configuration page for the token-ring
network interface card.
1. Make sure that the printer is offline. If the printer is online, press the
Online key to take it offline.
2. Press the Menu key once. TEST MENU appears in the message display
area.
3. Press the Item key until you see PRINT TR CONFIG.
4. Press the Enter key.
5. Press the Online key to restore the printer to READY status, and print the
configuration page. The printer must be online to print the configuration
page. It takes about a minute.
Note: The configuration page prints on the paper size that is specified by the
PAGESIZE item in the PCL Menu.

Printing a List of PCL5e Fonts

Situation: You want to see a list of the PCL5e fonts installed on the printer.
Action:
1. Press the Online key to take the printer offline.
2. Press the Menu key. TEST MENU appears in the display area.
3. Press the Item key until you see PRINT PCL FONTS.
4. Press the Enter key to print the PCL5e fonts list.
5. After the page prints, press the Online key to restore the printer to
READY status.

Printing a List of PostScript Fonts

Situation: You want to see a list of the PostScript fonts installed on the
printer.
Chapter 3. Using the Operator Panel
29