Table of Contents
Advertisement
4. Press the Value key to display the value you want.
5. Press the Enter key to change the setting to the value currently displayed
in the message display area. An asterisk (*) appears next to the value after
it is selected.
Notes:
1. When you select a new value, it stays selected until you change it or you
reset the printer defaults. Menu settings are saved when you power off the
printer.
2. Many print applications and printer drivers allow you to specify values
such as fonts and input trays. Values set by print applications or printer
drivers override values set at the printer.
Locking Menus
To lock menus, simultaneously press the Enter key and Shift key while you
power on the printer. When menus are locked, users can view menu settings,
but they cannot change them. Users can also continue to print configuration
pages and demo pages while menus are locked.
To unlock menus, simultaneously press the Enter key and Item key while you
power on the printer.
Printing the Printer Configuration Page
1. Make sure the printer is offline. If the printer is online, press the Online
key to take it offline.
2. Make sure Letter or A4-size paper is loaded in the default tray. See
"Selecting The Default Input Tray" on page 63 for more information.
3. Press the Menu key once. TEST MENU appears in the message display
area.
4. Press the Item key once. CONFIG PAGE appears in the message display
area. Note that the menu name appears on the top line and the menu item
appears on the second line.
Chapter 3. Using the Operator Panel
25
Advertisement
Table of Contents
