Printed Image Rubs Off or Smears
Possible Causes
There is moisture in the
paper
Paper does not meet
specification
The top cover is not fully
closed
The fuser is not
functioning properly
The Print Is Damaged
Possible Causes
Paper does not meet
specification
There is excessive moisture
in the paper
Damaged paper has been
loaded in the paper tray
Actions You Should Take
Load fresh, dry paper
Use recommended paper (see
"Selecting Paper and Other
Printable Material" on page 34)
Close the top cover
Consider replacing the usage kit.
See "Changing the Usage Kit" on
page 136
Actions You Should Take
Use recommended paper (see
"Selecting Paper and Other
Printable Material" on page 34)
Load fresh, dry paper
Load fresh, dry paper
Print Sample
Print Sample
Appendix B. Print Quality Problems
205