Table of Contents
Advertisement
Machine Info Menu
Item
ERROR LOG
TONER CTR
FUSER CTR
Language Menu
Use the Language Menu to select the language that the printer uses to display
messages and menus on the operator panel. English is the factory default.
Notes:
1. To select a language, press the Enter key when the language value is
displayed in the message display area. An asterisk (*) appears next to the
new value, indicating that it is now active.
2. If you are unfamiliar with using the operator panel to work with menus,
please read "Using the Operator Panel Keys" on page 23 and "Navigating
Menus" on page 24 before continuing.
Displays the last ten error messages logged by the printer, and the printer
page count when each message occurred. Use the Value key to scroll
through the list. Note that not all error messages get logged, including some
severe errors that halt printer operations.
Displays the toner cartridge counter.
Note: IBM recommends resetting this counter whenever you change the
toner cartridge. To reset the counter to 0:
1. Simultaneously press the Shift and Value keys.
2. Press the Enter key.
The new value will not be displayed until the next time you power off and
then power on the printer.
Displays the fuser counter.
Note: IBM recommends resetting this counter whenever you change the
usage kit. To reset the counter to 0:
1. Simultaneously press the Shift and Value keys.
2. Press the Enter key.
The new value will not be displayed until the next time you power off and
then power on the printer.
Description
Chapter 6. Operator Panel Menus
129
Advertisement
Table of Contents
