PCL PARALLEL
PCL TOKEN-RING
PJL PARALLEL
|
PJL TWINAX
|
|
|
|
PLEASE WAIT
POWER SAVER ON
PS ETHERNET
PS PARALLEL
Action: None required.
Meaning: The printer is receiving PCL5e data through the parallel
interface.
Action: None required.
Meaning: The printer is receiving PCL5e data through the token-ring
interface.
Action: None required.
Meaning: The printer is receiving or sending PJL information through
the parallel interface.
Action: None required.
Meaning: The printer is receiving or sending PJL information through
the twinax interface.
Action: None required.
Meaning: The printer is processing data and cannot immediately
respond to a request.
Action: Wait until the message clears. If the message remains and
processing on the host appears to have stopped, power off the printer,
wait ten seconds, and then power on the printer.
Meaning: The printer is in power-saving mode and has temporarily
shut off power to certain of its components. Power will be restored as
soon as a job is submitted.
Action: None required.
Meaning: The printer is receiving PostScript data through the
Ethernet interface.
Action: None required.
Meaning: The printer is receiving PostScript data through the parallel
interface.
Action: None required.
Appendix C. Printer Messages
211