Step 6: Attach Cables; Network Printing - IBM Infoprint Color 1220 Setup Manual

Step 6: Attach cables

tep 6: Attach cables

Network printing

Token-Ring, Ethernet 10BaseT, or
Ethernet 100BaseTX networks
(Category 5) use an RJ-45 connector.
bles
Your printer can be attached to a network or locally (directly to a
computer).
You can attach your printer to a network using standard network
cables.
A 10BaseT/100BaseTX Fast Ethernet port is standard on network,
network internet, and network duplex models. You can add a Token-
Ring or 10Base2 Ethernet port to any printer model by installing an
optional MarkNet internal print server.
To attach the printer to a network:
1
Make sure the printer is turned off and unplugged.
2
Connect the printer to a LAN drop or hub using standard
cabling that is compatible with your network.
The printer automatically adjusts itself for the network speed.
Token-Ring networks (Shielded Twisted
Pair) use a DB9 connector.
Ethernet 10Base2 networks (Thin Coax)
use a BNC T connector.
Attach cables
39