IBM InfoPrint 20 User Manual page 133

Hide thumbs Also See for InfoPrint 20:
Table of Contents

Advertisement

Coax Setup Menu
Item
PORT TMEOUT
nnn
IRQ TMEOUT
nn
HLD TMEOUT
nn
BUSY TMEOUT
nnn
OFF*
EDGE-EDGE
ON
ENABLE*
EAB
DISABLE
Value
Specifies the number of seconds the printer waits for data
before it determines there is no more data to receive for the
job. The printer then checks other installed attachments, and
will switch to attachments with jobs waiting. nnn can be
from 0 to 255. The default is 90 seconds. 0 dedicates the
printer to the coax attachment (the printer will not accept
data from other attachments).
Specifies when an IRQ (intervention required) timeout is
sent. This tells the printer how long to wait for an
intervention required condition to be corrected before
notifying the host of the error. nn can be from 0 to 3600
seconds. The default is 60 seconds. 0 specifies to never send
an IRQ timeout.
Specifies the hold timeout value. This value tells the printer
how long to wait if the printer is offline for an intervention
required condition to be corrected. After this time elapses,
the host is notified of the error. nn can be from 0 to 1200
seconds. The default is 10 seconds. 0 specifies to never send
a hold time out.
Specifies the busy timeout value. This specifies the amount
of time to wait (when the printer is connected to multiple
ports) for control to be returned to the coax attachment,
before notifying the host. nnn can be from 0 to 999 minutes.
The default is 20 minutes. 0 specifies to never send a busy
timeout.
Turns edge-to-edge printing on or off.
v OFF—the printer maintains a border of 4 mm on all four
paper sides.
v ON—The printer allows printing up to the physical page
size.
Notes:
1. To prevent toner from contaminating the printer, IBM
recommends leaving EDGE-EDGE set to OFF for coax
printing; use ON only when necessary.
2. The Coax Setup Menu item EDGE-EDGE applies to SCS
data only. To specify edge-to-edge printing for IPDS
data, use the EDGE-EDGE item on the IPDS Menu.
Enables or disables the extended attribute buffer.
Description
Chapter 6. Operator Panel Menus
123

Advertisement

Table of Contents
loading

Table of Contents