Table of Contents
Advertisement
Chapter 2. Installing Your Printer
IBM InfoPrint 20: Quick Setup Poster
To set up your printer, see IBM InfoPrint 20: Quick Setup Poster, which is
shipped with the printer. Use this checklist as a supplement to IBM
InfoPrint 20: Quick Setup Poster.
Installation Checklist
__ 1. Unpack your printer. See "Unpacking and Setting Up the Printer" on
__ 2. Install and load the paper tray shipped with your printer. See:
__ 3. Install the toner cartridge. See:
__ 4. Apply the operator panel overlay (if it has not already been applied).
__ 5. Power on the printer. See "Powering On the Printer" on page 13.
__ 6. Select a language for messages and menus (the default is English). See
__ 7. Print the printer configuration page to verify the printer works. See
__ 8. Connect a parallel cable (if desired). See "Connecting the Parallel
© Copyright IBM Corp. 1998
page 10 .
v IBM InfoPrint 20: Quick Setup Poster
v The installation sheets shipped inside the paper trays
v "Loading the A4/Letter Paper Tray" on page 41
v "Loading the A3/Ledger (11 x 17) Paper Tray" on page 45
v IBM InfoPrint 20: Quick Setup Poster
v "Changing the Toner Cartridge" on page 132
See "Applying the Operator Panel Overlay" on page 11.
"Selecting a Language" on page 15.
"Printing the Printer Configuration Page" on page 25.
Cable" on page 16.
Note: In addition to the parallel cable attachment, the InfoPrint 20
supports a wide variety of network attachment interfaces,
including twinax, coax, token-ring, and Ethernet attachments.
For information about installing network attachments and other
optional features, please read "Network Interface Cards" on
page 154 .
9
Advertisement
Table of Contents
