15. Open and close the top cover of the printer to clear the jam message.
|
|
|
16. Verify that READY appears on the operator panel.
Note: The next sheet that emerges from the printer after a paper jam may be
Fuser Area Jams
1. If the printer has a duplex unit, remove it. See "Removing the Duplex
Unit" on page 161.
2. Open the fuser cover.
stained, but staining should disappear after a few sheets.
CAUTION:
<2-25> High temperature; switch off the printer and allow at least 20 minutes
for parts in this area to cool before handling.
77
Chapter 5. Clearing Jams