Table of Contents
Advertisement
Token Ring Menu
Item
GATEWAY
nnn.nnn.nnn.nnn
ADDRESS
IFNO ADDR*
BOOTP
ON
OFF
IFNO ADDR*
DHCP
ON
OFF
ON*
NETWARE
OFF
112
InfoPrint 20: User's Guide -- CD Version
Value
Specifies the IP address of the default gateway. Consult
your network or LAN administrator before changing this
value. See "Chapter 9. Configuring Printer Network
Addresses" on page 185 for more information.
Note: This menu item appears only when TCP/IP is ON.
Specifies whether the token-ring network interface card
sends bootp requests to the server to have an IP address
assigned to the printer.
v IFNO ADDR—specifies that the token-ring network
interface card sends bootp requests only if the address is
not already set at the printer.
v ON—specifies that the token-ring network interface card
sends bootp requests.
v OFF—specifies that the token-ring network interface card
should not send bootp requests.
Notes:
1. This menu item appears only when TCP/IP is ON.
2. The number of bootp requests is determined by a setting
on the token-ring network interface card; the default is
three.
Specifies whether the token-ring network interface card
sends DHCP requests to the server to have an IP address
assigned to the printer.
v IFNO ADDR—specifies that the token-ring network
interface card sends DHCP requests only if the address is
not already set at the printer.
v ON—specifies that the token-ring network interface card
sends DHCP requests.
v OFF—specifies that the token-ring network interface card
should not send DHCP requests.
Notes:
1. This menu item appears only when TCP/IP is ON.
2. The number of DHCP requests is determined by a
setting on the token-ring network interface card; the
default is three.
Turns Netware communications on or off.
v ON—enables Netware communications.
v OFF—disables Netware communications.
Description
Advertisement
Table of Contents
